1
技术特色: | 技术参数: |
|
|
- Low noise preamplifier (0.74 nV/√(Hz)) - High gain up to +92 dB - Switchable analog filters - Support fast TGC (time gain compensation) - 2 signal inputs PE and TT - Input attenuator (-20dB) - Input Impedance 50 Ohm, 10pF - 100MHz sampling frequency, 10bit resolution - Up to 512k x 16bit samples memory - Delay settings up to 65535 sample periods - various triggering mode - Data transfer speed - up to 132MB/s - Expansion Connector for extra functions daughter-board - Interfaces (RS232, RS485, SPI, I2C) - Standard PCI short card (174.63mm x 106.68mm) - BNC or Lemo analog connectors - DB15 connector for I/O and power lines - Weight: 172.5g |
Analog parameters: Input Amplifier Gain: -28dB to 68dB (step 1dB, error ±0.3dB) Input Post-Amplifier: off or +24dB Input Attenuator: off or -20dB Input Range: ±275mV (±2.5V with Attenuator active) Full Bandwidth: 0.5 MHz - 25 MHz (-3dB) Switchable Filters(-3dB): 0.5 - 6MHz, 0.5 - 10MHz, 0.5 - 15MHz, 0.5 - 25MHz, 1 - 6MHz, 1 - 10MHz, 1 - 15MHz, 1 - 25MHz, 2 - 6MHz, 2 - 10MHz, 2 - 15MHz, 2 - 25MHz, 4 - 6MHz, 4 - 10MHz, 4 - 15MHz, 4 - 25MHz |
Technical Data - cont: | Inputs / Outputs: |
Pulser: Pulse Voltage: off(0V) to 360V (positive pulse, Short circuit step pulser) Charging Time: regulated from 0 to 3.1us in 0.1us steps Fall Time: <= 20 ns Pulse Duration: Short circuit, bandwidth up to about 50MHz Output impedance: < 1Ω A/D data acquisition: Resolution 10 bit Sampling Frequency(MHz): 100; 50; 33,3; 25; 20; 16,7; 14,3; 12,5, 11,1; 10; 9,1, 8,3; 7,7; 7,14 and 6,67 Data Buffer: from 1 to 262143 (256k) samples in step of 1 Delay Time: Post trigger from 0 to 65535 sample periods in step of 1 Hardware data processing: Hardware Positive¹), Negative¹), Absolute data processing; 3 x measure gate; Peak detector; Hardware averaging. DAC (TGC) with arbitrary waveform generator: Frequency: 100MHz Resolution: 8 bi Max. gain changing: 48dB pro step Trigger: On-board trigger timer; Application trigger rate Software controlled; External trigger 2x inputs, TTL Signal. Counters / Input for incremental encoder: Counters for Incremental Encoders 2 channel, 16-bit |
Analog: 2 x BNC or Lemo connectors DB15 connector: Inputs: 2 inputs for Incremental encode 2 general purpose digital lines; Outputs: Trigger output signal (Sync Out); 3 general purpose output; 2 fast output buffers for clock synchronization.¹) Others: +12V, -12V fused supply for powering external devices; +5V or Vreg (0-9V) output for control/supply external device. PCI Connector: PCI rev2.2, 32bit, 33MHz, 132MB/s max transfer bandwidth; Universal connector for 3.3V or 5V PCI sockets. Expansion connector: 2x10pin 2.54mm connector for special functions daughter-boards +12V, -12V, +5V, +3.3V power pins; I/O pins serial interfaces (3.3V signal levels): RS232, SPI, I2C and others; Inputs for general purpose counters; Interrupt input; Analog input for A/D converter. ¹)available in selected designs. |
Copyright © 2022 TECLAB All Right Reserved. 湘ICP备17023616号-2 京公网安备110105006761